Leveling wedges set 0-12 mm | 1 mm, 300 straps 100 wedges | no. 12056

However, here you can order the components individually

Wedge levelling system set for 1 mm joint width | Art. 12056

Scope of delivery:

• 100 wedges
• 300 Tension straps for tile thickness 0-12 mm
• 1 leveling pliers (plastic)

Advantages wedge levelling system:

• Easy to use
• Evenly laid tiles without overdentures
• Perfect for laying large format tiles
• Suitable for wall and floor installation
• Wedges are reusable

Application wedge levelling system:

1. place the tab under the tile in the tile adhesive and place the next tile
2. push the wedge through the bracket by hand and press it into the bracket using the levelling pliers until the tiles are level (press the pliers carefully and with feeling) The wedge adjusts automatically in the bracket and remains in position. Allow the adhesive to harden
3. break off flaps together with the wedges in the direction of the joint. The lower part of the flap remains in the adhesive bed and is also grouted

Further wedge levelling system sets:

• Art. 12057 Wedge Levelling System Set 2 mm joint width, 0-12 mm tile thickness (100 wedges, 300 tabs, 1 pair of pliers)
• Art. 12058 Wedge levelling system set for thick tiles, 2 mm joint width, 12-20 mm tile thickness (100 wedges, 300 tabs, 1 clamp)
• Art. 12055 Wedge levelling system Starter Set, 0-12 mm tile thickness (50 wedges, 100 tabs, 1 pair of pliers)

Tip: When laying large formats (e.g. from 60 x 60 cm), use the buttering-floating method!

Do you have questions about laying with the wedge levelling system? Give us a call:

phone +49 8667 878120

Further articles from our levelling system range can be found here!