Levelling system wedges set 12-20 mm tile thickness | Art. 12058
Included in the set:
- 100 wedges
- 300 pull straps for thick tiles (12-20 mm) - 2 mm joint width
- 1 wedge pliers (plastic version)
Application Levelling system wedge set:
- place the pull tab under the first tile in the tile adhesive and place the second tile next to it
- pick up a wedge and push it through the opening of the pull tab with the straight side down - using the pliers, push the wedge through the pull tab until the tiles are raised or lowered to a level where the tile adhesive can harden
- after the tile adhesive has hardened, the wedge can be broken off together with the pull tab in the direction of the joint
That is why you should lay large tiles with a levelling system:
With large tiles, even small irregularities on the tile edges are quickly visible. With a levelling system, you can prevent protruding tile edges or overdentures even during installation. All levelling systems available from KARL DAHM are easy to use and inexpensive to purchase. You are sure to find the right system for your requirements in our levelling system section.
Advantages:
- For installation on walls and floors
- No overteeth with large formats
- A perfect, uniform joint pattern
- Simple, fast application, which you will soon automatically integrate into your laying process
- The probability of complaints is minimized
- The wedges of the levelling system are reusable and can be used with all pull straps
Do you have questions about our levelling system wedges set? Then give us a call:
phone +49 8667 878-120
We are happy to advise you!
Do you have any questions on this item?