Universal pedestal joint 2 mm no. 12563

Joint spacer 2 mm - For universal pedestals from KARL DAHM

The new universal paving pedestals from KARL DAHM are suitable for various applications and can be used variably.

The pedestal bearing system consists of 3 parts

1. The basic pedestal – either Art. 12560 Pedestal low (28-43 mm)
   or Art. 12561 Standard pedestal (43-58 mm) - forms the lower part of
   this pedestal system.
2. In order to achieve the desired height (over 58 mm), any number of extension rings <
3. Art. 12562 (30 mm each) can be used.
4. Finally, a joint spacer (either 2 mm joint Art. 12563 or 4 mm joint Art. 12564) is mounted on the pedestals as the upper part 

Advantages of the Universal paving pedestals:

• Choose between 2 or 4-mm joints (Art. 12563 or 12564)
• Flexible heights from 28 to x mm achievable
• An integrated simple turning mechanism allows for choosing and adjusting if the head of the pedestal
  is fixed  or self-levelling (self-levelling for slope compensation up to 5%) Joint spacers (upper parts) with anti-slip and sound-absorbing rubber padding

Universal paving pedestals - the complete system:

• Art. 12560 Universal pedestal, low 28-43 mm
• Art. 12561 Universal pedestal standard 43-58 mm
• Art. 12562 Extension ring 30 mm
• Art. 12563 Joint spacer 2 mm
• Art. 12564 Joint spacer 4 mm

 Accessories:

• Art. 12565 Special adjustment key 3 functions for Universal pedestals
• Art. 12541 V2A wall spacer
• Art. 11865 Protecting mat 22 x 22 cm for use with pedestals