Tile Spacers 3 mm for 3 mm joints | 2500 pcs. | no. 16462 - Tile Leveling System

Tile spacers 3 mm | 2500 pieces for Levelmac levelling system by KARL DAHM | Art. 16462

Scope of delivery:

• 2500 Cross-threaded spacers 3 mm joint

Application:

The cross thread tabs are to be used like normal joint crosses. However, they offer the advantage that the tiles can be levelled to an even level at the same time. In addition to the cross-threaded brackets, we also recommend using the basic threaded brackets of the Levelmac levelling system. With the Levelmac levelling system pulling hoods, all threaded lugs (base, cross, T-piece) are suitable!

1. Apply adhesive, insert the first tile, place the threaded tab under the tile
2. Place the next tile in the adhesive so that the threaded tabs are fixed in the joint
3. Screw the pulling hoods onto the threaded brackets, the tiles are raised or lowered to a level - the pulling hood remains on the threaded bracket for the time being
4. Allow the adhesive to harden, twist off the pulling hoods and break off the protruding threads of the threaded lugs in the direction of the joint - grout the floor as usual

Advantages of the "Levelmac" tile levelling system from KARL DAHM:

• Perfectly suited for large format installation
• You obtain an even and level joint pattern
• Overteeth or protruding edges are avoided - no more complaints
• For installation on walls and floors
• No further tools such as pliers or pistols necessary
• economical to buy

Our recommendations and other articles from the levelling system range:

• Levelling system XXL-Set for 3 mm joints (300 pulling hoods black and 2500 basic threaded brackets 3 mm) Art. 12543
• Levelmac protection plate for pulling hoods - protect the base from dirt (300 pieces) Art. 12591