Karl Dahm Dust Butler Universal Art. 12075 Dust extraction aid til Ø 82mm sockets

Karl Dahm Dust Butler Universal dust extraction and drilling jig with level
Art. 12075

The Dust Butler Universal 12075 enables low-dust drilling and also serves as a drilling jig up to Ø 82 mm. The triple drilling jig is ideally suited for multiple holes, e.g. for sockets. With additional dragonfly.

The product is perfect for dust-free work! You can drill without leaving any debris.
The Dust Butler is suitable for every standard vacuum cleaner.

Dust is a common problem on construction sites, and how construction sites are left behind is a criterion for many customers - for example with regard to recommendations.

Application of the Dust Butler Universal:

1. Connect the vacuum cleaner hose to the rubber adapter of the Dust Butler.
2. Position the Dust Butler in the desired location (on the wall or on an unlaid tile).
3. Press the Dust Butler lightly on the cuttings and switch on the vacuum cleaner.
The dust extraction pulls itself tight due to the negative pressure.
4. Drill the required holes with the angle grinder or with a drill.
5. Particularly when drilling the wall, it must be ensured that the Dust Butler is held firmly after the vacuum cleaner has been switched off in order to avoid uncontrolled detachment and possible damage.

Security requirements:

Observe the general safety requirements when working with hand-held electrical devices. The work material should be reliably secured. Use individual protection.

Our Dust Butler is also available in other sizes:

Dust Butler Mini for holes, diameter 18mm
Dust Butler Maxi for holes, diameter 82mm
Dust Butler Universal with dragonfly ideal for sockets