Karl Dahm Dust Butler Maxi Art. 12074

Karl Dahm Dust Butler Maxi dust extraction and drilling jig Art. 12074

The Dust Butler Maxi 12074 enables low-dust drilling and also serves as a drilling jig up to Ø 82 mm.

The product is perfect for dust-free work! You can drill without leaving any dirt.
The Dust Butler is suitable for every standard vacuum cleaner.

Dust is a common problem on construction sites, and how construction sites are left behind is a criterion for many customers - for example with regard to recommendations.

Use of the Dust Butler Maxi:

1. Connect the vacuum cleaner hose to the rubber adapter of the Dust Butler.
2. Position the Dust Butler in the desired location (on the wall or on an unlaid tile).
3. Press the Dust Butler lightly on the cuttings and switch on the vacuum cleaner.
The dust extraction pulls itself tight due to the negative pressure.
4. Drill the required holes with the angle grinder or with a drill.
5. Particularly when drilling the wall, it must be ensured that the Dust Butler is held firmly after the vacuum cleaner has been switched off in order to avoid uncontrolled detachment and possible damage.

Security requirements:

Observe the general safety requirements when working with hand-held electrical devices. The work material should be reliably secured. Use individual protection.