Tile spacers 2 mm to Tile levelling system Order No. 12461

 Tile spacers 2 mm - 500 pcs to Tile levelling system

Innovative system designed to prevent lippage!

This system makes it easy to achieve a flat, lippage free floor.

Very easy to use and good value for money.
Saves you time and helps to achieve perfect joints when laying large format tiles.
Caps are re-usable whereas the threaded straps stay in the adhesive.

Application:

1. Insert the straps underneath the tile
2. Screw the re-usable caps onto the straps until the desired level is reached
3. Screw off the re-usable caps after curing and break off the straps at their built-in weak spot 

Usage per m² (approximately):

depending on the format of the tiles

60x30cm:       about  22 pieces                    90x40cm: about 14 pieces
60x60cm:       environ 11 pieces                 120x60cm: environ  8 pieces

Can be used with tiles up to 14mm thickness!

In addition to the standard straps this system is also available with tile spacers and tile T-spacers.
So this system can at the same time be used as a tile spacer for joints of 2-3mm.

For tile levelling system Order No. 12450

•  12454 Standard straps 250 pcs
  

•  12455 Standard straps 500 pieces

• Art.Nr.12450 Basic Set black 12 mm - 50 Caps black /  250 Standard Straps
  

   

• Art.Nr.12452 Basic Set , grey 20 mm - 50 Caps grey / 250 Standard Straps

• 12456 150x Black Caps  12 mm

• 12475 150x Grey Caps 20 mm

Tile spacers Tile levelling system 

• 12460 Tile spacers 2 mm 250 pcs
• 12461 Tile spacers 2 mm 500 pcs
• 12462 Tile spacers 3 mm 250 pcs
• 12463 Tile spacers  3 mm 500 pcs

Tile T-spacers Tile levelling system 

• 12469 Tile T-spacers 2 mm 250 pcs
• 12470 Tile T-spacers 2 mm 500 pcs
• 12471 Tile T-spacers 3 mm 250 pcs
• 12472 Tile T-spacers 3 mm 500 pcs
• 12473 Tile T-spacers 4 mm 250 pcs
• 12474 Tile T-spacers 4 mm 500 pcs

Very easy to use and good value for money.
Saves you time and helps to achieve perfect joints when laying large format tiles.
Caps are re-usable whereas the threaded straps stay in the adhesive.

Application:

1. Insert the straps underneath the tile
2. Screw the re-usable caps onto the straps until the desired level is reached
3. Screw off the re-usable caps after curing and break off the straps at their built-in weak spot 

Usage per m² (approximately):

depending on the format of the tiles

60x30cm:       about  22 pieces                    90x40cm: about 14 pieces
60x60cm:       environ 11 pieces                 120x60cm: environ  8 pieces

Can be used with tiles up to 14mm thickness!

In addition to the standard straps this system is also available with tile spacers and tile T-spacers.
So this system can at the same time be used as a tile spacer for joints of 2-4mm.