AQIX | Mobile water dosing device from Collomix, Art. 40889

AQIX | The new mobile water dosing device from Collomix - No more inaccurate mixing ratios

The new water dosing device from Collomix promises the exact amount of water at the touch of a button. With this mobile dosing device, you can always mix your tile adhesive, levelling compounds, thin-bed mortar, screed and much more perfectly. You save water, material and time.

Caution: Always store the appliance in a frost-proof place and ventilate before each use!

The exact amount of water required to mix your material as specified by the manufacturer is a challenge. Only a few millilitres too much or too little and the result is over.

With the automatic water dosing device from Collomix, this is no longer a problem. Thanks to the battery-powered device (2 x AA batteries included) you are always mobile.

Application AQIX water dosing device

The water dosing unit can be easily fixed to any mixing bucket thanks to the retaining bracket. For the water hose, the Collomix water dosing device has both a 3/4" thread for 1/2" hose connection, it is compatible with the Gardena plug-in system and has a 3/4" bayonet coupling. This makes it easy to attach the water hose to the dosing unit. Now all you have to do is switch on the unit, set the desired water quantity on the display and press "Start". The Collomix AQIX automatically regulates the set water quantity.

Technical data of the AQIX water dosing device:

• Adjustable dosing quantity: 1 - 99 litres in 0.1 litre steps
• Flow rate: 10-25 l/min at 6 bar
• Operating pressure: 2 - 6 bar
• Accuracy: + 0,05 l (deviation at 0,3 - 10 L)
• Battery: 2 x AA (incl.)
• Water connection: 3/4"
• Weight: 488 g

The advantages of AQIX at a glance:

• Consistently high material quality
• always perfect dosage of the water quantity
• wireless and mobile
• to attach to each mixing bucket
• many hose connection possibilities
• easy to use
• automatic dosing, switches off automatically when water quantity is set
• manual dosing at the push of a button is also possible
• Complaints and possible construction defects are prevented
• Up to 50 % time saving during mixing
• Robust design due to shock-proof plastic housing - dust-tight and splash-proof on all sides (IP 64)
• 2 preset water quantities

With the AQIX water dosing device, your building materials will always have the perfect consistency. This reduces the risk of construction defects and the risk of complaints. You always get a satisfactory result.

Thanks to the metal retaining bracket, the dosing unit can be universally attached to mixing buckets, automatic mixing stations and tubs. The shock-resistant and robust housing protects the water dosing device in everyday construction site use. It is also splash-proof on all sides.