Tile Spacers 4 mm joints | 2500 pcs. | no. 16464 - Leveling System

These threaded lugs are no longer available. As an alternative we recommend Art. 10733 Joint crosses 4 mm

Tile spacers crosses for 4 mm joint width | in XXL pre-pack with 2500 pieces, Art. 16464

Threaded brackets for the Levelmac levelling system - With joint cross for 4 mm wide joints

Scope of delivery:

• 2500 Threaded brackets crosses for 4 mm joint width

You save 20% when buying the stock pack (2500 pcs.) compared to buying smaller units of the threaded tab crosses!

Application Note Tile Spacers

The tile spacers function like conventional joint crosses. They serve to maintain the joint width when laying large formats. However, in addition to the cross-threaded brackets, you should also use our basic threaded brackets for a perfect levelling result. The basic threaded shackles have a flat base plate, which means that they can be laid regardless of the joint width and the course of the joint.

This is how the tile levelling system is used:

1. apply adhesive and lay the first tile
2. place threaded tab under the tile
3. insert next tile
4. screw the pulling hood onto the thread of the threaded lug and level the tiles
5. allow the adhesive to harden
6. unscrew the pulling hoods and break off the thread of the threaded plates in the direction of the joint
7. grout the tiled floor as usual

We recommend using the Levelmac tile levelling system from KARL DAHM:

• Art. 12543 XXL-Set with 300 pulling hoods black and 2500 basic threaded brackets 3 mm