Tile cutter Superline 920 mm, art. no. 11484

Tile cutter Superline 920 mm, art. no. 11484

A stable aluminum / steel construction - break plates up to 2.0 cm without any problems.

Tile cutter data:

• cutting length: 920 mm
• diagonal cut: 650 x 650 mm
• crushing capacity: 20 mm
• weight: 14 kg
• HM wheel/ DM: 22 mm TiN

Advantages of the Superline tile cutter:

One advantage of this tile cutter is that you have an adequate view of the material to be cut while using it. Furthermore, the machine is equipped with a lockable breaking device, a particularly wide stop bar with a millimeter scale, a support surface made of non-slip cellular rubber and a transport safety device for the guide knob. During tiling, scratches or marks can be prevented by the non-slip rubber feet, the pivot point can be easily repositioned and the crusher easily changed. Thus this tile cutter can be used quickly for the processing of tiles and mosaic from 3.5 mm to 18 mm!

The machine is suitable for processing the following materials:

• Tiles
• Floor plates
• Clinker
• Stoneware
• Porcelain Stoneware
• Glass
• Mosaic (earthenware)

Attention:

Not every 2 cm porcelain stoneware tile is suitable for breaking or cutting in dry cutting! This is because: Some tile materials are difficult to work with due to their physical properties.

Please contact us if you have any questions!

E-mail: info@dahm-werkzeuge.de Phone: +49 (0) 8667/ 878-120 WhatsApp: +49 (0) 176 1000 1616