VPE: 100 pieces in carton
The tile crosses are also available in 4 and 5 mm joint widths
Our plastic tile crosses are a great tool when laying rectangular tiles.
Thanks to our tile crosses you can achieve the same distance in the joint. With these tile crosses 3 mm, as also mentioned above you can achieve a distance of 4 and also 5 mm. Each rectangular tile is then surrounded by 4 tile crosses. Even if the tiles are laid offset, wings can be broken off at the crosses. Or to be able to lay tiles at the edge. Likewise, by breaking off a wing, a 3-sided tile cross can be created.
4mm tile cross: https://www.karldahm.com/fliesenkreuz-4mm-abtrennbar.htm
5mm tile cross : https://www.karldahm.com/fliesenkreuze-5mm-abtrennbar.htm
As a variant there are also the T-shape tile crosses (3-legged tile crosses)
In the version of 1, 2, and 3 mm.
3mm : https://www.karldahm.com/fliesenkreuz-t-stueck-2in1-3mm.htm
2mm : https://www.karldahm.com/t-stueck-fliesenkreuz-2in1-2mm.htm
1mm : https://www.karldahm.com/t-stueck-fliesenkreuz-2in1-1mm.htm
Laying on sand, gravel or mostly outdoors of relatively thick floor tiles there are tile crosses with a floor ring attached underneath. The corners of the adjacent floor tiles are on the same floor ring, so that no overtooth has and all are positioned at the same height.
Plate joint cross 3mm : https://www.karldahm.com/kreuzfugenauflager.htm
Contact us if you have any questions - advice is our strength
E-mail: info@dahm-werkzeuge.de Phone: +49 (0) 8667/878-0 WhatsApp: + +49 (0) 176 100