Suction pump with pressure gauge and 3-fold sealing lip | Art. 12003

Pump suction lifter with manometer to check the suction power | metal version no. 12003

Our powerful pump suction lift is now equipped with a pressure gauge that warns of a loss of suction power.

Advantages of the pump-suction lifter:

• Stable metal construction
• Load capacity up to 120 kg
• Can also be used on rough, structured surfaces thanks to 3-fold sealing lip
• For supporting and laying large tiles
• Delivery in a practical plastic case

Our tip: Always keep the suction surface of the pump-suction lifter clean. In this way you ensure a durable and reliable suction power.

Transporting large tiles safely with the KARL DAHM pump suction lifter

The pump-suction siphon has a triple sealing lip, thanks to which it sucks absolutely firmly even on structured surfaces. The suction power can be precisely dosed thanks to the integrated pump. 

The use of the pump-suction siphon

1. Place the suction lifter on the tile or slab and make sure that the suction plate lies completely on the material
2. By pumping with the pumping plunger, you now generate the suction force of the suction lifter on the material. As soon as the maximum suction power is reached, the ram can no longer be pumped.
3. Now the tile can be transported safely (for tiles with a size of 60 cm and above, you should use two pump suction lifters).
4. To release the vacuum again, press the metal button at the other end of the handle, the suction lifter detaches from the tile

New: the pump suction lifter with integrated pressure gauge - for additional safety

In order to be able to permanently monitor the suction power, the pump suction lifter has a manometer that displays the suction power at any time. This helps you to avoid damage to the material due to loss of suction power.