Ring, pluggable 120mm high, art. no. 12605

Ring, pluggable 120mm high, art. no. 12605

The new Pluggable Ring for the stilt bearings simplifies the raising of raised floors by 120 mm. Laying floor tiles outdoors requires little effort thanks to the Pluggable Rings for our stilt bearings.
All our multifunctional stilt bearings are practical to use and offer added value when laying tiles and slabs outdoors.

All the advantages of our multifunctional stilt bearings:

- The changeover from self-leveling to fixed is made by a simple mechanism in the upper part of the stilt bearings
- Our self-leveling pedestal bearings compensate for slopes up to 5%.
- The universal pedestal bearings can be used with a fixed head as well as with a self-leveling head
- The extension rings can be used to increase the height of the stilt bearings as desired

How to use the Universal pedestal bearings as well as the extension rings:

1. select the basic stilt bearing consisting of article number 12560 (28 - 43 mm height) or the article 12561 (43 - 58 mm height).
2. to adjust to the desired height, any number of extension rings (article number 12562&12605) can be placed on the basic pedestal bearing
3. to finish, choose the top part with the joint spacer in 2 mm joint width (art. 12563) or 4 mm joint width (art. 12564)

This accessory makes installation very easy:

- Art. 12565 Special Adjustment Wrench 3in1
- Art. 12541 V2A wall spacer
- Art. 11865 Underlay mats for stilt bearing
Stilt bearing universal - basic stilt bearing:
- Art. 12560 Stilt support Universal 28 - 43 mm
- Art. 12561 Stilt support Universal 43 - 58 mm
- Art. 12563 Spacer 2 mm joint width
- Art. 12564 Spacer 4 mm joint width
- Art. 12565 Universal adjustment wrench 3 in 1