Maxi set leveling system transparent 2 mm, order no 12548

Maxi Set leveling system transparent for 2 mm joints

Attention: For sensitive surfaces we recommend the washers with the article number 12489

Protect sensitive tile surfaces from discoloration with the new Maxi Set leveling system transparent.

The transparent traction hoods do not differ in application from the conventional, black traction hoods from Karl Dahm. They are made of a transparent plastic that leaves no residue on the tile surface.

The Maxi Set leveling system transparent contains:

• 150 transparent pulling hoods
• 1500 tabs, 2 mm wide
• 1 mixing bucket, 33 l

Perfect grout pattern - without excess teeth or height offsets!

Quick and easy application:

Before application, please ensure that the substrate is perfectly level. The Maxi Set leveling system transparent cannot compensate for hollow positions of several millimeters. For this purpose, we recommend using the buttering-floating method.

Step 1: Insert the threaded tabs under the tile in the tile adhesive

Step 2: Embed the tile in the adhesive. The leveling system tabs are now fixed in the joint

Step 3: Turn the pulling hoods onto the threaded lugs, level and allow the adhesive bed to harden

Step 4: Twist off the pull hoods, break off or step off the tab protrusion at the predetermined breaking point

If you have any questions about our leveling system, we will be happy to help you!

Tel.: 08667 878-0

info@dahm-werkzeuge.de