Attention: For sensitive surfaces we recommend the washers with the article number 12489
Leveling system for laying tiles, porcelain stoneware and large formats.
The Jumbo set is suitable for tiles 3 - 12 mm. With this set you get narrow and exact joints of 2 mm.
You can use the levelling system both on the floor and on the wall. The caps of the levelling system can be reused several times.
Step 1: Insert the threaded tabs under the tile in the tile adhesive
Step 2: Embed the tile in the adhesive. The leveling system tabs are now fixed in the joint
Step 3: Turn the pulling hoods onto the threaded lugs, level and allow the adhesive bed to harden
Step 4: Twist off the pull hoods, break off or step off the tab protrusion at the predetermined breaking point
If you have any questions about our leveling system, we will be happy to help you!
Tel.: 08667 878-0
info@dahm-werkzeuge.de