Levelmac - leveling set XXL black, 2 mm, order no. 12449

Tile leveling system now in XXL set! Lay tiles flat quickly and easily

Attention: For sensitive surfaces, we recommend the washers with article number 12489

TILE LEVELING SYSTEM XXL - THE SET FOR BIG CHALLENGES

With the new XXL set tile leveling system, you can lay even larger areas quickly and easily without overcuts.

INCLUDED IN THE TILE LEVELING SYSTEM XXL-SET:

• 300 black pulling hoods for tile thickness 3 - 12 mm
• 2500 Threaded lugs base 2 mm (white) for joint width 2 mm

Using the tile leveling system is child's play and requires no more time than laying without the tile leveling system. The few steps are completed in just a few simple steps:

Step 1: Insert the threaded tabs under the tile in the tile adhesive

Step 2: Embed the tile in the adhesive. The leveling system tabs are now fixed in the joint

Step 3: Turn the pulling hoods onto the threaded lugs, level and allow the adhesive bed to harden

Step 4: Twist off the pull hoods, break off or step off the tab protrusion at the predetermined breaking point

TILE LEVELING SYSTEM XXL-SET - WHAT YOU SHOULD BEAR IN MIND:

The prerequisite for a perfect tiled floor with the tile leveling system is a completely level substrate. As already mentioned, the use of the buttering-floating method is advantageous here, as it significantly reduces the risk of hollows and increases the adhesion between the tile and the substrate.

Before starting work, test the black pulling hoods of the tile leveling system on an inconspicuous area of a tile, as these can cause abrasion on very sensitive surfaces. In this case, Karl Dahm accepts no liability.

---

If you have any questions about our leveling system, we will be happy to help you!

Tel.: 08667 878-0

info@dahm-werkzeuge.de