100 pcs. plastic tile wedges, Art. 11 084
100 pcs. 2 mm pull tabs for tiles with thickness 0 - 12 mm (slab thickness), Art. 11 092
1x pliers for leveling system, art. 11 509
1 transport bucket, 10 liters with lid
Tile laying systems are developed to facilitate the laying of large format tiles - because for aesthetic reasons, joint distances are becoming smaller and smaller, tiles are becoming larger and larger. Karl Dahm offers you a qualitative laying aid - the wedge system.
This wedge system with its 2 mm tabs is perfectly suitable for tiles with a thickness of 0 - 12 mm and can be used for laying tiles on walls and floors! At Karl Dahm we also have the wedge system in other versions, see Art. 12 052 and 12 054.
How does it actually work?
Apply the tile adhesive, provided you have a level, dry and sufficiently prepared screed floor.
Start laying the first tile.
Push the 2 mm tabs into the joint and lay the next tile. Repeat the process until you have finished laying the desired area.
Now take a wedge and push it through the tab until the two tiles are on the same level.
Use the pliers to push the wedge further into the tab to perfect the level.
The tabs and wedges from the wedge system will remain in the tiles until the tile adhesive is completely dry.
Finally, remove the wedges (reusable!) from the tabs; kick them off at the predetermined breaking point.
And thanks to the Karl Dahm wedge system you have a surface laid on a level surface!
Avoid over-toothing and tripping edges - with the Karl Dahm wedge system!
If you have any questions, please do not hesitate to contact us! Call us at +49 (0) 8667/ 878-0, send us an e-mail to info@dahm-werkzeuge.de. On site you can reach us Monday - Thursday from 7:00 to 17:00, Friday from 7:00 to 16:00.
And since new you can also reach us via WhatsApp! +49 (0) 176 1000 1616
