Leveling system transparent basic set 1 mm, order no 12547

Leveling system transparent basic set with 1 mm threaded tabs and transparent tension hoods.

Attention: For sensitive surfaces we recommend the washers with the article number 12489

The new leveling system transparent basic set for a perfectly laid joint pattern without overhangs or height offsets - on walls and floors!

The leveling system transparent Basis Set contains:

50 transparent pulling hoods
250 lugs, 1 mm
1 mixing bucket
Quick and uncomplicated application of the leveling system transparent Basis Set:
Before application, please ensure that the substrate is perfectly level. The leveling system transparent Basis Set cannot compensate for hollow layers of several millimeters. For this purpose, we recommend using the buttering-floating method.

Step: Insert the threaded tabs under the first tile.
Step: Now insert the second tile into the adhesive. Now the threaded tabs are fixed between the tiles.
Step: Then turn the tension hoods onto the threads of the threaded tabs until all adjacent tiles are level.
Step: Proceed in this way over the entire area to be laid. The advantage of our leveling system: You can readjust the tension hoods at any time as long as the adhesive is not yet dry. Then allow the adhesive to cure completely.
Step: After the adhesive has cured, the tension hoods can be twisted off and the threaded tabs can be broken off at their predetermined breaking point. This works best with the foot or with a rubber mallet.
 

If you have any questions about our leveling system transparent base set, we will be happy to advise you!

We are available from Monday to Thursday from 7:00 - 17:00 o'clock
and Fridays from 7:00 - 16:00 o'clock for them attainable:

Tel: 08667 878-0
Fax: 08667 878-200
WhatsApp: 017610001616
E-Mail: info@dahm-werkzeuge.de

Visit us at Chiemsee and test the leveling system transparent base set on site:

Ludwigstraße 5
83358 Seebruck