Karl Dahm Smoothing Trowel Set of 4 Art. no. 12602
Karl Dahm Smoothing Filler Set of 4 Art. 12602
With the new smoothing spatula set from Karl Dahm, grouting is super easy.
Features:
Set of 4: 4mm, 6mm, 8mm, 10mm.
Made of high quality plastic
The spatulas are highly elastic and bendable
Effective even in hard-to-reach places
Perfectly suitable for all common sealants
Clean and effective work thanks to sharp peeling edges.
For the production of standardised corner joints
Instructions for use:
The substrate should be dry, load-bearing, clean and free of soluble substances.
Cut the nozzle of the sealant cartridge slightly larger than the desired joint size.
Now apply the sealant into the joint.
Spray the filled joint with smoothing agent or spray it with water or brush it with a brush.
Spray the trowel as well, then apply to the joint and brush off the excess sealant with light pressure.
Application:
Joints must be clean, free of adhesive residues, oil and grease.
Inject a little excess sealant into the joint.
Either dry the sealant or spray it with a commercially available smoothing agent and then remove it.
Please note the instructions of the sealant manufacturer for an optimal result.
Cleaning:
Not only the application, but also the cleaning is very easy. Simply remove the sealant from the trowel with water or wipe it off the trowel with a disposable cloth.
Do not use solvents!
The set consists of four spatulas, with the size of 4mm (spatula in the color blue), 6mm (spatula in the color red), 8mm (spatula in the color white) and 10mm (spatula in the color black).
Keep your joints clean and free of adhesive residue with the smoothing spatula set from Karl Dahm. Out now.
Karl Dahm Smoothing Filler Set of 4 Art. 12602
With the new smoothing spatula set from Karl Dahm, grouting is super easy.
Features:
Set of 4: 4mm, 6mm, 8mm, 10mm.
Made of high quality plastic
The spatulas are highly elastic and bendable
Effective even in hard-to-reach places
Perfectly suitable for all common sealants
Clean and effective work thanks to sharp peeling edges.
For the production of standardised corner joints
Instructions for use:
The substrate should be dry, load-bearing, clean and free of soluble substances.
Cut the nozzle of the sealant cartridge slightly larger than the desired joint size.
Now apply the sealant into the joint.
Spray the filled joint with smoothing agent or spray it with water or brush it with a brush.
Spray the trowel as well, then apply to the joint and brush off the excess sealant with light pressure.
Application:
Joints must be clean, free of adhesive residues, oil and grease.
Inject a little excess sealant into the joint.
Either dry the sealant or spray it with a commercially available smoothing agent and then remove it.
Please note the instructions of the sealant manufacturer for an optimal result.
Cleaning:
Not only the application, but also the cleaning is very easy. Simply remove the sealant from the trowel with water or wipe it off the trowel with a disposable cloth.
Do not use solvents!
The set consists of four spatulas, with the size of 4mm (spatula in the color blue), 6mm (spatula in the color red), 8mm (spatula in the color white) and 10mm (spatula in the color black).
Keep your joints clean and free of adhesive residue with the smoothing spatula set from Karl Dahm. Out now.
Related Products
Customers who bought this product also bought these items:
