The joint protection pin serves as a hygiene prevention for all sucking and cleaned joints and protects the joints from contamination by water, wax, oil, grease and mold. This pen is natural, colourless and food-safe and can be used indoors and outdoors. In addition, the joint torpedo joint protection pin Art. 16104 is also ideally suited for silicone joints as well as in the wellness area. You can also use the pen after joint torpedo treatment. Due to the convenient and easy handling of Karl Dahm's joint protection pin, the pin is optimally in the hand.
The processing temperature should be between 10-35° C. The full protective effect unfolds after about 6 to 24 hours. You can use the pads again at any time after drying the joints.
Application of the joint protection pin:
First select a grinder that matches the joint width, and then slide it into the handle so that it snaps into place.
First, check whether the grinding web matches the joint width.
Then move the joint torpedo back and forth with light pressure so that impurities and supernatants are detached from the joints.
Then suck the dust and wipe the joints dry.
Impregnate the cleaned joints by following them with the joint protection pin to protect against dirt and mould. A second time after the joints with the joint protection pin ensures optimal protection.
Fugue torpedo Art. 16100
With karl Dahm's Joint Torpedo Art. 16100, you can effectively, quickly and easily remove dirt and deposits from your joints, such as algae, mold spores, age-related continences and limescale deposits. It is therefore also ideally suited for cleaning the joints before applying the joint protection with the joint protection pin or a fugenft air. However, it is also used in hygiene areas, such as.B in hospitals. After an inaccurate grouting, you can even optimally remove supernatatos.