Step 1: First select the diamond bar matching the joint width and slide it into the handle. Before working, test in an inconspicuous place to ensure that the width of the diamond bar fits securely.
Step 2: Move the joint torpedo back and forth with light pressure on the joint to be worked on to remove dirt and impurities from the grout. The diamond bar should always fit exactly into the joint. Make sure not to remove too much material..
Step 3: First the joint must be swept or vacuumed. Apply a suitable joint cleaning agent to the grout and allow it to work in after the recommended working time. Then clean the grout with the joint brush
Step 4: Finally, wipe the joint with a damp cloth. We further recommend that you use the joint protection stick Art. 16104 to impregnate the joints.
The grout pen is ideal after treating the joints with the joint cleaner. This stick protects the tiles from water, oil, grease, wax and mould. The grout pen is natural, colourless and food safe.
We are happy to advise you! Simply contact us during our business hours
from Monday to Thursday
7.00 - 17.00 and Friday 7.00 - 16.00 hours under:
info@karldahm.com
Trust in best quality, quick delivery and over 60 years of experience.