Akemi Everclear 2-component color adhesive, cream no. 12963
Fast curing color adhesive for exterior use for permanent bonding.
- for permanent bonding in exterior and interior areas - of large-area, light-colored ceramics
- allows the use for vertical bonding of visible joints
- outstanding adhesion, no subsequent discoloration
- extremely weather resistant
- wide bonding gap possible
Scope of delivery:
- 2-component cartridge 400 ml in cream (cc1620)
- 1 x mixing nozzle
Application:
- The adhesive substrate must be clean, dust-free, completely dry and slightly roughened.
- Remove the cartridge cap and insert the cartridge into the gun. Now press the handle until material comes out of both openings, then screw on mixing nozzle. The first 10 cm of adhesive that you squeeze out of the mixing nozzle should not be used (When using without mixing nozzle, mix both components well).
- The mixture remains workable at 20°C for approx. 20 min. The bonded parts are ready for transport after 4-5 h at 20°C, loadable and workable after approx. 10 h and reach their maximum strength after 48 h.
- Heat accelerates the curing process, cold delays it
Application video:
Everclear two-component adhesive is creamy in consistency, contains fillers and is solvent-free. It is very easy to process due to its soft, stable consistency and dries quickly on the surface. The adhesive can be easily dispensed and mixed in the intended joint press gun with mixing nozzle (no. 12987 and 12971).
The adhesive bonds ceramics, natural and artificial stone and engineered stone seamlessly and exhibits very low shrinkage. This also reduces the stress in the adhesive layer to a minimum.
No subsequent discoloration. Extremely weather resistant.
The Everclear 2-component color adhesive is available in 13 different colors!
>> Here you can find more colors
Do you have any questions on this item?
