Diamond dry core bit set GOLD Art. 50249

Diamond dry core bit set GOLD Art. 50249 - clean and precise bores

The drill bits are suitable for almost all materials, especially for porcelain stoneware, tiles and natural stone up to a material thickness of 30 mm. Thanks to the M14 holder, the drill bits can be easily used with the angle grinder. The speed should be between 10,000 and 13,000 rpm. The drilling takes place in dry condition, no water cooling is necessary.

Scope of delivery:

• Ø 20, 38, 50, 65 mm in the case

Scope of application:

• Ø 20 mm: M16 threaded rods for WC mounting
• Ø 38 mm: Holes for hot and cold water, angle valves
• Ø 50 mm: Sewage pipes (HT pipes), water pipes
• Ø 65 mm: sockets, distribution boxes, switches

Easy to use:

1. Screw the drill bit onto the mounting spindle of the angle grinder.
2. Place the drill bit on the material at an angle.
3. Work in circular movements evenly and without pressure into the material.
4. Reduce the pressure in case of sparks. Avoid overheating. Take cooling breaks for hard and thick materials.

Do you have questions about our core bits? Simply call us during our business hours at 08667 878-0 or send us an e-mail to info@dahm-werkzeuge.de.