Diamond dry core bit MATRIXTEC Ø 68 mm, Art. 50825

Diamond dry core bit MATRIXTEC 68 mm, Art. 50825 - A new generation of diamond core bits.

Drill holes in the hardest materials quickly and accurately - without much effort and simply perfectly. The new MATRIXTEC drill bits make this possible. A completely new type of diamond coating ensures excellent cooling during drilling and an extended service life of the diamond drill bits. 

The diamond set of these drill bits is arranged in a controlled manner in the matrix and has a new type of wear-resistant coating. This makes the drill bits longer lasting and more cutting than conventional diamond drill bits. A very long service life and consistently fast cutting performance are thus guaranteed.

The diamond dry core bit has an M14 mount and thus fits on any common angle grinder with M14 thread.

The diameter of 68 mm is perfect for drilling holes in sockets.

The correct application of the MATRIXTEC diamond drill bits:

1. Mount the diamond drill bit on the angle grinder (M14 mount).
2. Start the angle grinder
3. Guide the diamond core bit to the desired position on the material and move the core bit into the material with wobbling (swiveling) movements - DO NOT place the core bit flat on the material, this will not ensure sufficient cooling of the diamonds during drilling and the core bit may be damaged
4. Work your way into the material until the hole is complete

The new matrix coating guarantees better cooling of the diamonds and consistent running of the drill bit. Thus, the drill bit remains ready for use for a longer time and you save costs with every drilling.

The advantages of MATRIXTEC diamond core bits at a glance:

1. M14 attachment for easy and quick mounting on almost any angle grinder.
2. Suitable for tiles, fine stoneware and natural stone
3. Consistently high cutting performance and tool life thanks to innovative matrix coating
   Best cooling and homogeneous synchronization during drilling
4. Available in many common diameters