Diamond core bit MATRIXTEC Ø 28 mm with matrix coating, Art. 50812

Diamond core bit MATRIXTEC Ø 28 mm, Art. 50812

What makes the new MATRIXTEC diamond core bits so special?

The novel and innvoative diamond coating sets the MATRIXTEC diamond core bits apart from other core bits on the market. The special feature of these drill bits is that the diamond coating is laid out in a controlled "matrix", which ensures improved air circulation during drilling. This in turn significantly increases the service life of MATRIXTEC diamond core bits. So you save time and money. In addition, the drilling result is simply perfect every time. 

How to use the diamond dry core bits:

As with any dry core bit with a diamond coating, MATRIXTEC core bits are mounted on the angle grinder using the M14 attachment. Then start the machine and place the diamond core bit on the material at an angle. Work your way into the material in swiveling movements. Drill until the diamond drill bit has drilled completely through the material. Use as little force as possible when drilling, let the diamond core bit do the work. The swiveling movements ensure that the diamonds are optimally cooled during drilling.

Note: Do not place the drill bit flat on the material, this can lead to premature wear and unwanted fraying on the material.

All advantages and functions at a glance:

• Best cooling of the diamond coating due to novel MATRIXTEC arrangement.
• Consistent running and high cutting performance of the core bit
• Extended tool life
• Available in many different diameters
• Suitable for tiles, porcelain stoneware, natural stone and ceramics
• For materials up to 30 mm thick
• With M14 attachment for all common angle grinders