Cutting and milling slide, no. 40667

Cutting and milling slide no. 40667

What used to only have to be done by a wet cutting machine or by elaborate grinding work is now done by the handy cutting and milling carriage Art. 40667.

Due to the even and exact guidance you can work on tiles and natural stone materials with thicknesses of 3 - 20 mm, as well as from a size of at least 30 cm. An angle setting of 30 - 55 degrees can be selected. An angle grinder, whose drive shaft is connected to the cutting carriage, is used as the drive machine for the cutting carriage. Then our diamond cutting disc Speed Art.: 50250 is mounted. Now you set the desired angle setting and the distance to the material to be processed, which depends on the material thickness. After adjusting the adjusting screws, the device is ready for use and a test cut can be made with the milling and cutting carriage for the final check. If no more corrections of the setting are necessary, you can start the operation.

Scope of delivery:

• Cutting and milling carriage (angle grinder not included in scope of delivery)

Recommended accessories:

• Art. 40265 Angle grinder Bosch, electrically adjustable Ø 125 mm