Cross line laser self-levelling, green, for wall and floor Art. 41374
The new self-levelling cross line laser convinces with outstandingly visible laser lines in striking green.
Advantages and functions:
- Perfect for all testing and levelling work
- Create horizontal and vertical laser lines on walls and floors anywhere in the room, for straight and diagonal tile laying (3x360° laser lines)
- Helps to check and create the correct height of the floor covering
- Flatness check on wall and floor
One laser for everything:
6 laser crosses (3x360° laser lines) form green laser lines visible up to 30 m away. Small minimum distance of the laser plane to the floor: 8 mm and to the wall with 6 mm. The cross line laser has a small platform in the range of 25 to 85 mm for the height-correct laying of floor tiles (individually adjustable). Included in delivery is a height-adjustable wall mount with swivelling holding rail and 20 mm adapter (also for tripod connection 5/8"). The attachment to the tripod is freely suspended, thus providing an optimal line display on the floor. By means of height control pins with pulse function, it is possible to check for unevenness of the floor for use with receiver (optional). Operation is possible via the integrated rechargeable battery or batteries (batteries not included).
All advantages again at a glance:
- 6 laser crosses from 3x360° laser lines
- The laser lines are individually switchable
- With plumb line function
- Min. distance of the laser plane to the ground: 8 mm
- Min. distance of the laser plane to the wall: 6 mm
- Height adjustable platform (25 to 28 mm) infinitely variable
- Optical warning signal if outside the self-levelling range
- Manual function for inclined application
- Connection for tripod 5/8" (bottom of unit/with adapter)
- 1/4" connection (top of the device)
- Use with receiver possible (optional)
The wall bracket included in the scope of delivery also offers the following advantages:
- it is height and side adjustable
- for wall hanging by screw/nail
- Mounting on magnetic surfaces
- for belt fastening
Technical data:
- Self-levelling range: + 3°.
- accuracy: + 2 mm/10 m
- Working range without receiver: 40 m (radius)
- Working range with receiver: 60 m (radius)
- Operating time: 5 h (at full capacity)
- Laser beam: green
- Laser class: 2
- Dust/water protection: IP 54
- Power supply: Li-Ion battery
- Temperature range: -10°C to +45°C
- dimensions: 115 x 96 x 118 mm
Scope of delivery:
- Li-Ion battery
- Charger and USB cable (3.0)
- Battery compartment for alkaline batteries
- Height-adjustable platform
- Wall Mount
- Connecting rail
- 20 mm adapter with 5/8" for tripod
- 3 height test pins
- Magnetic target plate
- in suitcase
Do you have any questions on this item?