Clip-Caps to tile leveling system Levelmac® no. 12480

Attention: For sensitive surfaces we recommend the washers with the article number 12489

Clip-Caps for Levelmac levelling system by KARL DAHM | 150 pieces, Art. 12480

With this innovative, foldable clip-caps, the laying and levelling process with the Levelmac levelling system is significantly accelerated.

The new system makes it possible to simply fold the caps open and close them again around the threaded lugs. For levelling, only about half a turn to one turn of the clip-cap is then necessary.

Advantages of the clip-caps:

• Suitable for use with all Levelmac threaded straps (crosses, T-pieces, base straps and base straps long)
• For tile thickness 3 - 18 mm(!)
• Easy to use: Folding up - levelling - knocking off
• Reusable
• Faster removal of broken set screws - no tedious unscrewing necessary, simply open and dispose of

Scope of delivery:

• 150 Clip-Caps

Levelling tiles - now even easier and faster with the new Levelmac® Clip-Caps

The new hinged pulling hoods offer the advantage of being compatible with all Levelmac threaded brackets. Whether you install with the basic threaded lugs, the crosses or the T-pieces, the hinged pulling hoods fit every thread. Even the extra-long basic tabs for strong tiles and slabs fit into the hinged hoods.

This means that they are also suitable for tile thicknesses of 3-18 mm, so you only need one type of pull cover for thin and thick tiles (for comparison: our standard Levelmac pull covers black are suitable for tile thicknesses of 3-12 mm and our grey pull covers for tile thicknesses of 12-20 mm)

The application of the clip-caps is very easy:

1. Place the threaded straps as usual under the tiles in the adhesive bed
2. Open the clip-caps, place them around the threads of the straps and close the clip-caps again
3. By closing it you fix the threaded tab in the clip-caps. You only need half a turn to one turn until the tile is levelled
4. After the adhesive bed has hardened, the clip-caps are knocked off as usual together with the threaded lugs in the direction of the joint. To remove the broken thread from the clip-caps, simply unfold it. The thread falls out by itself
5. The clip-caps can be reused many times.