NEW! Holds even better. With improved special rubber suction plate. LED charge level indicator better visible.
The battery-powered vacuum lifter E-Grip Plus is a handy vacuum lifter for lifting all non-porous materials such as tiles, slabs, glass, ceramics, etc. Thanks to the improved special rubber suction plate with 5-fold sealing lip, it is also possible to lift slightly structured or rough surfaces such as wood, concrete and stone. The suction lifter can lift tiles and slabs weighing up to 100 kg. The diameter of the suction plate measures 20 cm. The operating time with a fully charged battery is 16 h.
The suction lifter is perfect for use with our lifting frames!
The highlight: The suction lifter pumps up automatically in case of pressure loss!
ATTENTION:
Before you start using the suction lifter, you must fully charge it (the indicator light changes from red to green). The charging process is possible with the charger included in the scope of delivery. The charging time is 6-8 hours.
The surface of the material must be dry. Also make sure that the surface of the material to be vacuumed is clean so that the vacuum lifter can attach to the material without problems. The suction lifter should not be used at temperatures below -12 C° and not above 49 C°.
Simply press the on switch on the side to start the suction process. The vacuum lifter will now suck itself onto the desired surface. As soon as the vacuum pump stops, the suction lifter is ready for use and the maximum suction pressure has been reached. Now you can easily lift the tile. A built-in sensor automatically detects a loss of suction power and activates the pump if necessary to maintain constant suction.
To release the vacuum, simply press the vacuum release lever (on the other side of the on/off switch). The vacuum lifter now detaches from the object without leaving any marks. Do not remove the vacuum lifter until the air has completely escaped to prevent uncontrolled detachment.
For larger tiles and slabs, we recommend the use of 2 suction lifters so that you can apply more stability when carrying.
In the sturdy plastic case you also get a USB charging cable type C (with mains plug) for charging, an instruction manual, a special cleaning brush and the battery vacuum lifter E-Grip Plus. The average charging time is approx. 6-8 hours. Next to the on/off switch of the vacuum lifter you will find the charging socket for the charging cable. When charging is complete, a green light comes on.
The underside of the product should always be cleaned to ensure optimal adhesion. To clean the suction lifter of surface dirt on the suction plate, use the cleaning brush provided or a moistened fibre cloth. Always store the suction lifter in the case to protect it from external influences and to keep the rubber sealing lip clean.