Cordless suction vibrator Vibrofix in case, Item no. 40901

Cordless Tile Vibrator "Vibrofix" in Case, Item No. 40901

For the professional removal of air bubbles in the adhesive bed during the installation of wall and floor tiles.

The cordless tile vibrator "Vibrofix" is an electric tile vibration machine, also known as a tile laying machine. It is used to lay tiles, paving stones, marble, and other slabs by generating high-frequency vibrations through its built-in motor. These vibrations ensure that the tiles are effectively set into the cement mortar or other adhesives.

Designed with a non-marking rubber suction cup, the "Vibrofix" ensures that no marks or discolouration are left on the surface of the tiles or other materials. This feature protects expensive tiles from damage and maintains a clean appearance after installation.

Included in the package:

• Cordless Tile Vibrator "Vibrofix"
• 2 special batteries
• 1 special charger
• 1 tool case

Technical Specifications:

• Dimensions: 395.6 x 162.5 x 155 mm
• Weight: 1 kg
• Battery voltage: 21 VDC, 1500 mAh Li-Ion
• Battery capacity: 1500 mAh
• Power: 6 W
• Input voltage: 100V-240 VAC, 50/60 Hz, 1A max
• Working temperature: 0°C-60°C (30°F-140°F)
• Operating time: Up to 5 hours
• Charging time: 1-2 hours
• Diameter of rubber pad: 155 mm
• Vibration frequency: 12000+
• Charging interface: DC

Application of the Cordless Tile Vibrator "Vibrofix":

NOTE: Ensure the work area is dry; do not use the machine on wet tiles or under damp conditions to avoid slipping or electrical hazards. When changing the battery or performing maintenance, make sure the machine is turned off and disconnected from the power supply to prevent injuries or electric shocks.

Before first use: Charge one of the special batteries with the special charger. When the battery is fully charged, the charger's indicator light will turn green. Then, insert the battery into the device with the correct alignment.

Position the machine on the tile surface, secure the suction cup by locking it forward, lift the tile and move it to the work area. Then release the suction cup lock. Activate the machine by pressing the switch. Adjust the vibration frequency as needed using the stepless regulator.

How does the Vibrofix battery-powered vibrator work when laying tiles or slabs?

It transmits vibrations to minimise cavities under tiles.

The Vibrofix battery-powered vibrator creates an even pressure on the freshly laid tiles or slabs through its vibrating movement. This reliably removes air bubbles or cavities under the material. This improves adhesion in the adhesive bed and ensures a longer service life and stability of the covering.

What materials is the Vibrofix suitable for?

Ideal for large-format tiles, porcelain stoneware, concrete and natural stone slabs.

The Vibrofix is ideal for the professional laying of large-format wall and floor tiles, especially porcelain stoneware. The device is also effective for concrete or natural stone slabs. It adapts flexibly to different surfaces and materials.

How is the battery-powered shaker operated?

Cordless thanks to powerful rechargeable battery - flexible use.

The Vibrofix is battery-operated and therefore requires no power cable at all. This ensures maximum freedom of movement on the construction site and allows it to be used even in hard-to-reach places. The long-lasting battery enables several applications per charge.

Does the device also protect sensitive materials from damage?

Yes, the vibration intensity is adjusted to protect the material.

The vibration force is designed in such a way that tiles or slabs are not damaged, but simply optimally worked into the adhesive bed. This means that even sensitive materials such as porcelain stoneware or natural stone remain undamaged.

Is the Vibrofix also suitable for continuous use?

Yes, thanks to its robust construction and ergonomic design.

The device is designed for professional use on construction sites and impresses with its robust construction, long battery life and easy handling. The ergonomic handle reduces fatigue - even during long periods of use.

Get the KARL DAHM Vibrofix 40901 cordless vibrator now - for a powerful vibrating effect and optimum tile laying without any cables. Benefit from maximum precision, flexible application and ergonomic working on any construction site. Whether for large-format tiles or sensitive natural stone - the Vibrofix ensures perfect adhesion and reliably reduces voids. Order online now and lay professionally - faster, safer, more efficient!