Alignment device for large format tiles - Liftfix Pro - order no. 12644

Lifting device for large format wall tiles | Liftfix Pro Art. 12644, 1 piece - now new at KARL DAHM

The new Liftfix Pro lifting device facilitates the laying of XXL wall tiles enormously.

The system is easy to use and promises clean and safe results.

The advantages of the Liftfix Pro lifting device:

• easy application, safe placement of tiles on the wall
• adjustable to the millimetre by two adjusting screws
• for large-format wall tiles and slabs that cannot be laid from top to bottom
• highest accuracy - small irregularities can be compensated immediately
• No sound bridge to the floor - less risk during sound tests in residential buildings
• can also be used on slopes
• in combination with the KARL DAHM levelling system you get perfectly laid wall and floor tiles

The Liftfix Pro lifting device was specially developed for laying tiles, slabs and natural stone. It supports the tiler and makes working with large wall tiles much easier.

This is how the Liftfix Pro lifting device is used:

1. Apply the tile adhesive to the wall
2. Align the Liftfix Pro lifting device on the floor
3. Place the tile on the lifting device
4. Turn the adjusting screws to align the tile to the millimetre
5. Included in delivery is a sponge rubber pad, which you can glue to the surface of sensitive tiles

The problem of laying large-format wall tiles:

• the tiles are very heavy and can hardly be fixed by one person - previous solution: wooden wedges, which are laid underneath in an awkward way
• the floor is uneven, the tiles have to be aligned in a complex process
• the XXL wall tiles are not completely the same. The tile must be aligned at the bottom so that the joint is correct at the top

Do you have further questions about the new Liftfix Pro lifting device? Give us a call or write to us:

• phone: 0049 8667 878-120
• mail: info@karldahm.com