Clean the floor, tiles and other surfaces thoroughly so that you get a nice joint pattern and leave a good impression on your customers!
The work, the washing of grouted surfaces, is made easier for you by the use of sponge boards, grating etc. Sponge boards help the tiler to remove the remaining cement film and coarser dirt after grouting on the tiles. For the finer work, a tile sponge or hydrosponge is recommended at the end. With the sponge you can finally wash and clean the substrate. Hydro sponges can absorb even finer particles due to the particularly fine pores (high absorbency). They are also particularly suitable for absorbing water, dirt and cement residue. We have screened and also unscreened sponges and sponge pads for the sponge boards in our range. The screening significantly increases the washing performance of the sponges. The replacement sponge boards can also be purchased separately. In our assortment you will also find sponges that are acid-resistant.
When using sponge boards, the hands remain dry due to the grip and thus protect the skin already stressed by cement, mortar or glue. To protect your skin you will also find creams and ointments (see category: work clothing, work protection, skin protection à work protection-skin protection), which protect your skin from drying out or repair stressed, cracked hands.
Always wash the dirty sponges / sponge board pads thoroughly with clean water at the end of your work. Also always clean the remaining parts of the washing set at the end. Treat your tools with care to obtain a longer durability / life span. Good handling of your tools is essential.
For example:
Art. no. 11487 Tile Washing Set Express with 3 castor attachment, with wheels
Fill the bucket with clean water, put the grating in and attach the roller attachment to the upper edge of the bucket. The four rollers on the bucket provide relief for the back. The bucket can be easily pushed / rolled and does not need to be carried. This also means that nothing is spilled on the floor. For coarser dirt, such as cement residue, the sponge board is required. For the final polish, a hydrosponge is ideal. The sponge board or sponge absorbs the dirt and can then be pressed out on the roller attachment. In this way the dirty water and the remains of the dirt flow directly into the bucket and nothing goes missing. The dirt sinks down under the grating. The grating keeps the dirt in the bucket on the ground. This keeps the water and thus the sponges cleaner for longer. After squeezing out the sponge board is absorbent and highly absorbent again. At the end of your work, rinse the sponges with clean water, wash the grating and squeeze-out rollers and the wash set is ready for use again.
Do you have any questions or would you like personal advice about tile washing sets?
Give us a call!
Telephone +49 8667 878-120
Or write us!
E-mail: info@dahm-werkzeuge.de
The satisfaction of our customers is important to us!
Let us convince you of our tools!
Your Karl Dahm Team is looking forward to meeting you!