Everclear 2-component colour adhesive, white Art. 12965

Everclear 2-component colour adhesive, white, order no 12965

Weather-resistant 2-component adhesive for big, light-coloured outdoor ceramics

• for permanent bonding of large-area, light-coloured ceramics in exterior an interior areas
• enables the use for vertical bonding of visible joints
• outstanding adhesion, almost non-yellowing
• weather-resistant
• allows for creating wide adhesive joints/ gaps
• different colours available
• no subsequent discoloration

Scope of delivery:

• 2-component cartridge 400 ml, white

We suggest following accessories:

• Mixing nozzles, art. no. 12971
• 2-component Everclear joint gun, art. no. 12970 or
• 2-component skeleton gun Everclear, art. no. 12987

Order our Akemi colour card in advance to find the right tone for your adhesive.

Everclear two-component adhesive is creamy, contains filler and is solvent-free. Due to its soft, stable consistency, it is easy to apply and dries quickly on the surface. Dosage and mixture of the adhesive is easy
in appropriate joint filling guns. The adhesive bonds seamlessly to ceramics, natural and artificial stone as well as engineered stone and has very low shrinkage. This also reduces the tension in the adhesive layer to a minimum. 

Storage of Everclear 2-component adhesive:
Everclear 2-Component colour adhesive can be stored for 1 year in well sealed original containers in a dry, cool and frost-free environment. 

Instructions for use:

1. ensure that the surface is clean, dust-free, completely dry and roughened.
2. remove the cartridge cap and insert the cartridge into the gun. Now press the handle until material emerges from both openings, then unscrew the mixing nozzle and do not use the first 10 cm from the mixing nozzle (When using without mixing nozzle, make sure that both components are mixed well).
3. the mixture remains workable at 20 ° C for approx. 20 min. The bonded parts can be transported at 20 °C after 4-5 h, can be loaded and worked after approx. 10 h. They reach their maximum strength after 48 h.
4. heat accelerates, cold retards hardening

Do you have questions about our 2-component colour adhesive or the associated products? Contact us, we are happy to help:

                                               info@karldahm.com