Professional chalk line tool, metal
For precise and accurate marking of areas and routes.
In a high-quality metal housing for a long service life.
Application:
Open the inkwell access cover and slowly fill in the ink through the center of the sponge.
Pull the inkwell cord through the ink by pulling out the cord while holding down the ink level meter (incl. metering button). If necessary, repeat until the cord is evenly covered with ink.
Now pull the chalk line over the section to be marked. Use the spindle thumb-hold to lock the chalk line and position the head at a 90° angle and flush with the surface.
The notches on the line guide (notched line hold) keep the chalking line on the desired line.
Make sure that the chalking line is taut, then let the line snap gently.
Accessories:
10 252 Dye powder, red 50g
10 255 Dye powder, red 200 g
10 251 Spare cord, 20m
